Hello, i have bought new dedicated server from Hetzner and i did new install of debian 12. After that i use ispconfig autoinstaller. In ispconfig i can see message Your RAID is in RESYNC mode, i have never saw it in ispconfig. When i open it, i can see Code: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 nvme0n1p4[0] nvme1n1p4[1] 1869735232 blocks super 1.2 [2/2] [UU] [======>..............] resync = 34.2% (640340864/1869735232) finish=102.1min speed=200650K/sec bitmap: 13/14 pages [52KB], 65536KB chunk md2 : active raid1 nvme0n1p3[0] nvme1n1p3[1] 1046528 blocks super 1.2 [2/2] [UU] resync=DELAYED md1 : active (auto-read-only) raid1 nvme0n1p2[0] nvme1n1p2[1] 4189184 blocks super 1.2 [2/2] [UU] md0 : active raid1 nvme0n1p1[0] nvme1n1p1[1] 262080 blocks super 1.0 [2/2] [UU] unused devices: <none> My lsblk is Code: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS nvme0n1 259:0 0 1.7T 0 disk ├─nvme0n1p1 259:1 0 256M 0 part │ └─md0 9:0 0 255.9M 0 raid1 /boot/efi ├─nvme0n1p2 259:2 0 4G 0 part │ └─md1 9:1 0 4G 0 raid1 [SWAP] ├─nvme0n1p3 259:4 0 1G 0 part │ └─md2 9:2 0 1022M 0 raid1 /boot └─nvme0n1p4 259:5 0 1.7T 0 part └─md3 9:3 0 1.7T 0 raid1 / nvme1n1 259:3 0 1.7T 0 disk ├─nvme1n1p1 259:6 0 256M 0 part │ └─md0 9:0 0 255.9M 0 raid1 /boot/efi ├─nvme1n1p2 259:7 0 4G 0 part │ └─md1 9:1 0 4G 0 raid1 [SWAP] ├─nvme1n1p3 259:8 0 1G 0 part │ └─md2 9:2 0 1022M 0 raid1 /boot └─nvme1n1p4 259:9 0 1.7T 0 part └─md3 9:3 0 1.7T 0 raid1 / and df -h Code: Filesystem Size Used Avail Use% Mounted on udev 63G 0 63G 0% /dev tmpfs 13G 9.4M 13G 1% /run /dev/md3 1.8T 3.8G 1.7T 1% / tmpfs 63G 1.3M 63G 1% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock /dev/md2 989M 116M 823M 13% /boot /dev/md0 256M 160K 256M 1% /boot/efi tmpfs 13G 0 13G 0% /run/user/0 Does anybody have please any idea/solution why i see this message? Thank you,
