ISPConfig 3 and Debian Jessie

Discussion in 'Installation/Configuration' started by ZeroEnna, Apr 24, 2015.

  1. till

    till Super Moderator Staff Member ISPConfig Developer

    Debain 7 used apache 2.2, Debian jessie uses apache 2.4, the apache config syntax hs changed between these versions. therefor it is required to run a ispconfig update with "reconfigure services" first, then login to ispconfig, go to tools Y resync and run a resync on the websites. This will convert all vhosts to the apache 2.4 syntax.
     
    radim_h likes this.
  2. manolopm

    manolopm New Member

    I did a dist-upgrade, now I'm trying to do a ispconfig_update.sh to do a "reconfigure services" but it saids "There are no updates available for ISPConfig 3.0.5.4p5" . I suposse that I should force it to convert the vhosts to apache 2.4 syntax but I don't know how.
     
  3. manolopm

    manolopm New Member

    Ok. I found a solution. I don't know if this is the correct way, but it works for me.
    I change in /etc/apache2/apache2.conf :
    This line:
    IncludeOptional sites-enabled/*.conf
    By this other one
    IncludeOptional sites-enabled/

    So apache now load the vhosts files and all seems to work as it should.
     
  4. bch

    bch Member

    You should do a manual update: http://www.ispconfig.org/files/file/2-ispconfig/
     
  5. Bonzo

    Bonzo New Member

    Any news about the error radim described ? I have the same issue.

    Code:
    Apr 28 21:20:35 vps000 quotaon.sh[214]: Checking quotas...
    Apr 28 21:20:35 vps000 systemd[1]: quota.service: main process exited, code=exited, status=1/FAILURE
    Apr 28 21:20:35 vps000 systemd[1]: Failed to start Check And Enable File System Quotas.
    Apr 28 21:20:35 vps000 systemd[1]: Unit quota.service entered failed state.
     
  6. radim_h

    radim_h Member HowtoForge Supporter

  7. Bonzo

    Bonzo New Member


    If you manually start the quota service after boot (service quota start) the service starts without error. Maybe some systemd dependency problem ?
     
  8. radim_h

    radim_h Member HowtoForge Supporter

    I'm also having problem with FTP
    when tried to login over non-secured connection, getting message
    [WARNING] Authentication failed for user [c0abc]
    when tried over TLS, gettign message
    [WARNING] Sorry, cleartext sessions are not accepted on this server.#012Please reconnect using SSL/TLS security mechanisms.

    EDIT - SOLVED: pureftpd daemon seems to have problem with /etc/pure-ftpd/conf/TLSCipherSuite - which is there by default installation now
    when deleted, both uncrypted and crypted login ways are working!
    I thought it may be caused by totalcmd or Filezilla, but have no idea, why also unencrypted connection is not working then....
     
    Last edited: May 4, 2015
    till and Bonzo like this.
  9. bradgillap

    bradgillap New Member

    I'm in this situation as well. How do I proceed?


    "I did a dist-upgrade, now I'm trying to do a ispconfig_update.sh to do a "reconfigure services" but it saids "There are no updates available for ISPConfig 3.0.5.4p5" . I suposse that I should force it to convert the vhosts to apache 2.4 syntax but I don't know how"
     
  10. till

    till Super Moderator Staff Member ISPConfig Developer

    Use the manual update instructions from release notes:

    Code:
    cd /tmp
    wget http://www.ispconfig.org/downloads/ISPConfig-3-stable.tar.gz
    tar xvfz ISPConfig-3-stable.tar.gz
    cd ispconfig3_install/install
    php -q update.php
     
  11. bradgillap

    bradgillap New Member

    Okay, thank you. Did tools > resync as well for the vhosts.
    I'm still getting some vhost issues I think though as all the sites are error 403 forbidden.

    Code:
    Shall the script create a ISPConfig backup in /var/backup/ now? (yes,no) [yes]:
    
    Creating backup of "/usr/local/ispconfig" directory...
    Creating backup of "/etc" directory...
    Checking ISPConfig database .. OK
    Starting incremental database update.
    Reconfigure Permissions in master database? (yes,no) [no]:
    
    Reconfigure Services? (yes,no) [yes]:
    
    Configuring Postfix
    Configuring Jailkit
    Configuring Dovecot
    Configuring Spamassassin
    Configuring Amavisd
    Configuring Getmail
    Configuring Pureftpd
    Failed to get D-Bus connection: Unknown error -1
    Configuring BIND
    Configuring Apache
    Configuring vlogger
    Configuring Apps vhost
    Configuring Database
    Configuring Bastille Firewall
    Updating ISPConfig
    ISPConfig Port [8080]:
    
    Create new ISPConfig SSL certificate (yes,no) [no]:
    
    Reconfigure Crontab? (yes,no) [yes]:
    
    Updating Crontab
    Restarting services ...
    Failed to get D-Bus connection: Unknown error -1
    Failed to get D-Bus connection: Unknown error -1
    Failed to get D-Bus connection: Unknown error -1
    Failed to get D-Bus connection: Unknown error -1
    Failed to get D-Bus connection: Unknown error -1
    Failed to get D-Bus connection: Unknown error -1
    Update finished.
    
     
    Last edited: May 7, 2015
  12. till

    till Super Moderator Staff Member ISPConfig Developer

  13. SamTzu

    SamTzu Active Member

  14. maurotb

    maurotb New Member

    Same problem here...
    I have resolved with:
    Change /etc/fstab
    from
    usrjquota=quota.user,grpjquota=quota.group
    to
    usrjquota=aquota.user,grpjquota=aquota.group
    delete /home/quota.user and quota.group
    remount quota fs or reboot
    create new aquota.use aquota.group
    quotacheck -avcugm
     
  15. ande

    ande Member HowtoForge Supporter

    I just wanted to add that I did a successful dist-upgrade from Debian wheezy (7) to jessica (8) and everything seems to run fine - but I had to do a manual update from ISPConfig 3 as described in this thread and on other pages: It is not sufficient to execute "ispconfig_update.sh" if you have the newest version of ISPConfig already because ISPconfig thinks there's nothing to do. You need to download a new package even if you have that version already installed and proceed from there.

    Many thanks!
     
  16. radim_h

    radim_h Member HowtoForge Supporter

  17. webmaster-eddie

    webmaster-eddie New Member

    I have been unsuccessful trying to get apache2 mpm_event to work with this setup - jessie, apache 2.4, squirrelmail isponcig3, postfix and dovecot. Is it possible, and can you give a guideline about steps to take? I know that I have to remove mod_php5 and mpm_prefork and mpm_worker. But ISPConfig3 rysnc doesn't provide something usable for mpm_event. Is it suppossed to, and will you support this (mpm_event is the best reason to move to apache 2.4 - and the best performing way to run apache 2.4)

    Thanks for a response.

    Ed
     
  18. florian030

    florian030 Well-Known Member HowtoForge Supporter

  19. radim_h

    radim_h Member HowtoForge Supporter

    Quota is installed, when it is restarted afger system start, it works, but idliek to have a clean solution... Maybe its caused by wrong services startup order ?
    http://mixx.org/ispc3/ispconfig-quota-problem.jpg
     
  20. Raziel

    Raziel New Member

    To fix Debian Jessie "[FAILED] Failed to start Check And Enable File System Quotas" problem, you must start the Quota Service after the local filesystem has been mounted.
    In order to do this, append local-fs.target to /lib/systemd/system/quota.service in the After= section, restart, and check that everything is ok with journalctl or systemctl status.
     
    Last edited: Jan 28, 2016
    florian030 likes this.

Share This Page