Hi @ all! I installed ISPConfig on a Suse Linux 9.3 - System, and everything is working fine - but I can't send eMails using Outlook or Outlook Express. When I try to send a eMail using OE, it asks me to enter the username and password over and over again. This is what I found in the maillog: Code: Aug 20 07:40:22 ds80-237-152-59 postfix/smtpd[3864]: connect from ip60.163.1211F-CUD12K-04.ish.de[62.143.163.60] Aug 20 07:40:22 ds80-237-152-59 postfix/smtpd[3864]: warning: ip60.163.1211F-CUD12K-04.ish.de[62.143.163.60]: SASL LOGIN authentication failed Aug 20 07:40:22 ds80-237-152-59 postfix/smtpd[3864]: lost connection after AUTH from ip60.163.1211F-CUD12K-04.ish.de[62.143.163.60] Aug 20 07:40:22 ds80-237-152-59 postfix/smtpd[3864]: disconnect from ip60.163.1211F-CUD12K-04.ish.de[62.143.163.60] Receiving mails is working fine. If I send a eMail from a GMX-Account to [email protected], I can receive it using my Oulook. Any Ideas? Greets Marcus
It seems that SASL is not configured properly on your system. Have you configured your Postfix / SASL accordingly to one of the Howtos on Howtoforge?
I used this manual : http://www.howtoforge.com/perfect_setup_suse_9.3 Which steps out of this manual could I reproceed to get my Postfix / SASL working? Greets Marcus PS.: Sorry 4 my bad english. ^^
Postfix With SMTP-AUTH And TLS apt-get install cyrus-sasl cyrus-sasl-crammd5 cyrus-sasl-devel cyrus-sasl-digestmd5 cyrus-sasl-gssapi cyrus-sasl-otp cyrus-sasl-plain cyrus-sasl-saslauthd chkconfig --add saslauthd /etc/init.d/saslauthd start mkdir /etc/postfix/ssl cd /etc/postfix/ssl/ openssl genrsa -des3 -rand /etc/hosts -out smtpd.key 1024 chmod 600 smtpd.key openssl req -new -key smtpd.key -out smtpd.csr openssl x509 -req -days 3650 -in smtpd.csr -signkey smtpd.key -out smtpd.crt openssl rsa -in smtpd.key -out smtpd.key.unencrypted mv -f smtpd.key.unencrypted smtpd.key openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.pem -days 3650 postconf -e 'mydomain = example.com' postconf -e 'myhostname = server1.$mydomain' postconf -e 'smtpd_sasl_local_domain =' postconf -e 'smtpd_sasl_auth_enable = yes' postconf -e 'smtpd_sasl_security_options = noanonymous' postconf -e 'broken_sasl_auth_clients = yes' postconf -e 'smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_relay_domains' postconf -e 'inet_interfaces = all' postconf -e 'alias_maps = hash:/etc/aliases' postconf -e 'smtpd_tls_auth_only = no' postconf -e 'smtp_use_tls = yes' postconf -e 'smtpd_use_tls = yes' postconf -e 'smtp_tls_note_starttls_offer = yes' postconf -e 'smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key' postconf -e 'smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt' postconf -e 'smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem' postconf -e 'smtpd_tls_loglevel = 1' postconf -e 'smtpd_tls_received_header = yes' postconf -e 'smtpd_tls_session_cache_timeout = 3600s' postconf -e 'tls_random_source = dev:/dev/urandom' Now restart Postfix: /etc/init.d/postfix restart To see if SMTP-AUTH and TLS work properly now run the following command: telnet localhost 25 After you have established the connection to your postfix mail server type ehlo localhost If you see the lines 250-STARTTLS and 250-AUTH everything is fine. Type quit to return to the system's shell.
Hmm... I reworked this steps... Now I get the following error, when I try to "telnet localhost 25" : Code: Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused Trying ::1... telnet: connect to address ::1: Connection refused Edit: Okay, i tried telnet localhost 25 again, and now it says "Connected to localhost. Escape character is '^]'. When I type ehlo localhost and press Enter, absolutely nothing happens. quit or any other command - no response.
I get an error in the mail log : Code: Aug 29 20:48:50 ds80-237-152-59 postfix/smtpd[7702]: fatal: parameter "smtpd_recipient_restrictions": specify at least one working instance of: check_relay_domains, reject_unauth_destination, reject, defer or defer_if_permit Hmmm... What does it mean? Greets Marcus
Do you have this line in your main.cf? Code: smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination Hint: reject_unauth_destination is one word, without the space. The space is caused by the forum software! If not, search for the line that begins with "smtpd_recipient_restrictions" and replace it with the above line. Then restart postfix.
my main.cf includes this line: Code: smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,check_relay_domains I replaced it with yours, and restarted Postfix. Now telnet works, here is the log : Code: 220 xxl-radio.de ESMTP Postfix ehlo localhost 250-xxl-radio.de 250-PIPELINING 250-SIZE 102400000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250 8BITMIME But, if I try to send a Mail from Outlook Express or Outlook the following Error apperars in the mail-log : Code: Aug 29 21:08:58 ds80-237-152-59 postfix/smtpd[8866]: warning: connect to private/tlsmgr: Connection refused Aug 29 21:08:58 ds80-237-152-59 postfix/smtpd[8866]: warning: problem talking to server private/tlsmgr: Connection refused Aug 29 21:08:59 ds80-237-152-59 postfix/smtpd[8866]: warning: connect to private/tlsmgr: Connection refused Aug 29 21:08:59 ds80-237-152-59 postfix/smtpd[8866]: warning: problem talking to server private/tlsmgr: Connection refused Aug 29 21:08:59 ds80-237-152-59 postfix/smtpd[8866]: warning: no entropy for TLS key generation: disabling TLS support Aug 29 21:08:59 ds80-237-152-59 postfix/smtpd[8866]: warning: ip60.163.1211F-CUD12K-04.ish.de[62.143.163.60]: SASL LOGIN authentication failed Any Ideas?
Yes, it is. Here is the complete content of main.cf: Code: command_directory = /usr/sbin daemon_directory = /usr/lib/postfix unknown_local_recipient_reject_code = 550 debug_peer_level = 2 debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail newaliases_path = /usr/bin/newaliases mailq_path = /usr/bin/mailq setgid_group = maildrop html_directory = /usr/share/doc/packages/postfix/html manpage_directory = /usr/share/man sample_directory = /usr/share/doc/packages/postfix/samples readme_directory = /usr/share/doc/packages/postfix/README_FILES inet_protocols = all biff = no mail_spool_directory = /var/mail canonical_maps = hash:/etc/postfix/canonical virtual_maps = hash:/etc/postfix/virtusertable relocated_maps = hash:/etc/postfix/relocated transport_maps = hash:/etc/postfix/transport sender_canonical_maps = hash:/etc/postfix/sender_canonical masquerade_exceptions = root masquerade_classes = envelope_sender, header_sender, header_recipient program_directory = /usr/lib/postfix masquerade_domains = mydestination = $myhostname, localhost.$mydomain, $mydomain disable_dns_lookups = no mailbox_command = mailbox_transport = smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_client_restrictions = smtpd_helo_required = no smtpd_helo_restrictions = strict_rfc821_envelopes = no smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtp_sasl_auth_enable = no smtpd_sasl_auth_enable = yes smtpd_use_tls = yes smtp_use_tls = yes alias_maps = hash:/etc/aliases mailbox_size_limit = 0 message_size_limit = 102400000 smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_auth_only = no smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom home_mailbox = Maildir/ mydomain = xxl-radio.de myhostname = $mydomain default_destination_recipient_limit = 500 inet_interfaces = all Any Ideas?
You should add /etc/postfix/local-host-names to mydestination: Code: mydestination = $myhostname, localhost.$mydomain, $mydomain, /etc/postfix/local-host-names This is normally done by the ISPConfig installer. Also try this: Code: smtpd_use_tls = no smtp_use_tls = no and restart Postfix: Code: /etc/init.d/postfix restart
Hi falko! I've tried your tips, but i still get the following error in my log-file Code: Sep 3 15:35:30 ds80-237-152-59 postfix/smtpd[9381]: warning: ip7.163.1211F-CUD12K-04.ish.de[62.143.163.7]: SASL LOGIN authentication failed Hmmm...
saslauthd was running. I restarted - no errors : Code: Shutting down service saslauthd done Starting service saslauthd done
