Hey everyone, I'm running Ubuntu 5.10 Breezy Badger, and can't figure out how to get by a problem that stops the install... Here is some of the output from the terminal. CFLAG =-DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -mcpu=p entium -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DOPENSSL_BN_ASM_PART_ WORDS -DOPENSSL_IA32_SSE2 -DSHA1_ASM -DMD5_ASM -DRMD160_ASM -DAES_ASM EX_LIBS =-ldl CPUID_OBJ =x86cpuid-elf.o BN_ASM =bn86-elf.o co86-elf.o DES_ENC =dx86-elf.o yx86-elf.o AES_ASM_OBJ =ax86-elf.o BF_ENC =bx86-elf.o CAST_ENC =cx86-elf.o RC4_ENC =rx86-elf.o RC5_ENC =r586-elf.o MD5_OBJ_ASM =mx86-elf.o SHA1_OBJ_ASM =sx86-elf.o s512sse2-elf.o RMD160_OBJ_ASM=rm86-elf.o PROCESSOR = RANLIB =/usr/bin/ranlib ARFLAGS = PERL =/usr/bin/perl THIRTY_TWO_BIT mode DES_PTR used DES_RISC1 used DES_UNROLL used BN_LLONG mode RC4_INDEX mode RC4_CHUNK is undefined sh: make: command not found ./compile: line 113: make: command not found ERROR: Could not make OpenSSL cd: error retrieving current directory: getcwd: cannot access parent directories : No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory mv: cannot stat `binaries/zip': No such file or directory mv: cannot stat `binaries/unzip': No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `spamassassin': No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `uudeview': No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `clamav': No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors ./setup2: line 777: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your syste m! The installation routine stops here! Any help would be greatly appreciated.
It seems that "make" is not installed on your system. Please install these basic compile tools and packages: apt-get install binutils cpp cpp-4.0 fetchmail flex gcc gcc-4.0 libarchive-zip-perl libc6-dev libcompress-zlib-perl libdb4.3-dev libpcre3 libpopt-dev linux-kernel-headers lynx m4 make ncftp nmap openssl perl perl-modules unzip zip zlib1g-dev autoconf automake1.9 libtool bison autotools-dev
Thanks, that got me a lot further, but it's still producing errors: ERROR: Could not configure PHP cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory mv: cannot stat `binaries/zip': No such file or directory mv: cannot stat `binaries/unzip': No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `spamassassin': No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `uudeview': No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `clamav': No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors ./setup2: line 777: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here! Btw, I'm not a total linux noob, but figuring out why software won't install is kinda beyond me Thanks for your help
There must have been an error before what you posted. Please post the complete error message. BTW, if you start a new installation attempt, make sure you delete the old install_ispconfig directory (if existing) and unpack the ISPConfig tar.gz again.
+--------------------------------------------------------+ | You now have successfully built and installed the | | Apache 1.3 HTTP server. To verify that Apache actually | | works correctly you now should first check the | | (initially created or preserved) configuration files | | | | /root/ispconfig/httpd/conf/httpd.conf | | | and then you should be able to immediately fire up | | Apache the first time by running: | | | | /root/ispconfig/httpd/bin/apachectl start | | | Or when you want to run it with SSL enabled use: | | | | /root/ispconfig/httpd/bin/apachectl startssl | | | Thanks for using Apache. The Apache Group | | http://www.apache.org/ | +--------------------------------------------------------+ creating cache ./config.cache checking for Cygwin environment... no checking for mingw32 environment... no checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking whether gcc and cc understand -c and -o together... yes checking how to run the C preprocessor... gcc -E checking for AIX... no checking whether ln -s works... yes checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking for re2c... no configure: warning: You will need re2c 0.9.11 or later if you want to regenerate PHP parsers. checking for gawk... no checking for nawk... nawk checking if nawk is broken... no checking for bison... bison -y checking for bison version... 2.0 (ok) checking for flex... flex checking for yywrap in -lfl... yes checking lex output file root... lex.yy checking whether yytext is a pointer... yes checking for working const... yes checking for flex version... invalid configure: warning: flex versions supported for regeneration of the Zend/PHP parsers: 2.5.4 (found: 2.5.31). checking whether to force non-PIC code in shared modules... yes checking for pthreads_cflags... -pthread checking for pthreads_lib... Configuring SAPI modules checking for AOLserver support... no checking for Apache 1.x module support via DSO through APXS... yes checking for mod_charset compatibility option... no checking for member fd in BUFF *... yes checking for Apache 2.0 filter-module support via DSO through APXS... no checking for Apache 2.0 handler-module support via DSO through APXS... no checking for Apache 1.x (hooks) module support via DSO through APXS... no checking for Apache 1.x (hooks) module support... no checking for mod_charset compatibility option... no checking for Caudium support... no checking for CLI build... yes checking for Continuity support... no checking for embedded SAPI library support... no checking for Zeus ISAPI support... no checking for Milter support... no checking for NSAPI support... no checking for PHTTPD support... no checking for Pi3Web support... no checking for Roxen/Pike support... no checking for thttpd... no checking for TUX... no checking for webjames... no checking for chosen SAPI module... apache Running system checks checking for sendmail... /usr/sbin/sendmail checking whether system uses EBCDIC... no checking whether byte ordering is bigendian... no checking for socket... yes checking for socketpair... yes checking for htonl... yes checking for gethostname... yes checking for gethostbyaddr... yes checking for yp_get_default_domain... no checking for __yp_get_default_domain... no checking for yp_get_default_domain in -lnsl... yes checking for dlopen... no checking for __dlopen... no checking for dlopen in -ldl... yes checking for sin in -lm... yes checking for res_search... no checking for __res_search... no checking for res_search in -lresolv... yes checking for inet_aton... yes checking for dn_skipname... no checking for __dn_skipname... yes checking for ANSI C header files... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for inttypes.h... yes checking for stdint.h... yes checking for dirent.h... yes checking for ApplicationServices/ApplicationServices.h... no checking for sys/param.h... yes checking for sys/types.h... yes checking for sys/time.h... yes checking for netinet/in.h... yes checking for alloca.h... yes checking for arpa/inet.h... yes checking for arpa/nameser.h... yes checking for assert.h... yes checking for crypt.h... yes checking for fcntl.h... yes checking for grp.h... yes checking for ieeefp.h... no checking for langinfo.h... yes checking for limits.h... yes checking for locale.h... yes checking for monetary.h... yes checking for mach-o/dyld.h... no checking for netdb.h... yes checking for pwd.h... yes checking for resolv.h... yes checking for signal.h... yes checking for stdarg.h... yes checking for stdlib.h... yes checking for string.h... yes checking for syslog.h... yes checking for sysexits.h... yes checking for sys/ioctl.h... yes checking for sys/file.h... yes checking for sys/mman.h... yes checking for sys/mount.h... yes checking for sys/poll.h... yes checking for sys/resource.h... yes checking for sys/select.h... yes checking for sys/socket.h... yes checking for sys/statfs.h... yes checking for sys/statvfs.h... yes checking for sys/vfs.h... yes checking for sys/sysexits.h... no checking for sys/varargs.h... no checking for sys/wait.h... yes checking for termios.h... yes checking for unistd.h... yes checking for unix.h... no checking for utime.h... yes checking for sys/utsname.h... yes checking for sys/ipc.h... yes checking for dlfcn.h... yes checking for assert.h... (cached) yes checking for fopencookie... yes checking for broken getcwd... no checking for broken libc stdio... yes checking whether struct tm is in sys/time.h or time.h... time.h checking for tm_zone in struct tm... yes checking for missing declarations of reentrant functions... done checking for fclose declaration... ok checking for tm_gmtoff in struct tm... yes checking for struct flock... yes checking for socklen_t... yes checking size of intmax_t... 0 checking size of size_t... 4 checking size of ssize_t... 0 checking size of ptrdiff_t... 0 checking size of long long... 8 checking size of long long int... 8 checking size of long... 4 checking size of int... 4 checking for st_blksize in struct stat... yes checking for st_blocks in struct stat... yes checking for st_rdev in struct stat... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking for struct sockaddr_storage... yes checking for field sa_len in struct sockaddr... no checking for IPv6 support... yes checking for vprintf... yes checking for alphasort... yes checking for asctime_r... yes checking for chroot... yes checking for ctime_r... yes checking for cuserid... yes checking for crypt... no checking for flock... yes checking for ftok... yes checking for funopen... no checking for gai_strerror... yes checking for gcvt... yes checking for getlogin... yes checking for getprotobyname... yes checking for getprotobynumber... yes checking for getservbyname... yes checking for getservbyport... yes checking for getrusage... yes checking for gettimeofday... yes checking for gmtime_r... yes checking for grantpt... yes checking for inet_ntoa... yes checking for inet_ntop... yes checking for inet_pton... yes checking for isascii... yes checking for link... yes checking for localtime_r... yes checking for lockf... yes checking for lrand48... yes
checking for memcpy... yes checking for memmove... yes checking for mkstemp... yes checking for mmap... yes checking for nl_langinfo... yes checking for perror... yes checking for poll... yes checking for ptsname... yes checking for putenv... yes checking for realpath... yes checking for random... yes checking for rand_r... yes checking for regcomp... yes checking for res_search... (cached) yes checking for scandir... yes checking for setitimer... yes checking for setlocale... yes checking for localeconv... yes checking for setpgid... yes checking for setsockopt... yes checking for setvbuf... yes checking for shutdown... yes checking for sin... yes checking for snprintf... yes checking for srand48... yes checking for srandom... yes checking for statfs... yes checking for statvfs... yes checking for std_syslog... no checking for strcasecmp... yes checking for strcoll... yes checking for strdup... yes checking for strerror... yes checking for strftime... yes checking for strptime... yes checking for strstr... yes checking for strtok_r... yes checking for symlink... yes checking for tempnam... yes checking for tzset... yes checking for unlockpt... yes checking for unsetenv... yes checking for usleep... yes checking for nanosleep... yes checking for utime... yes checking for vsnprintf... yes checking for getaddrinfo... yes checking for strlcat... no checking for strlcpy... no checking for getopt... yes checking whether utime accepts a null argument... yes checking for working alloca.h... (cached) yes checking for alloca... yes checking for declared timezone... yes checking for type of reentrant time-related functions... POSIX checking for readdir_r... yes checking for type of readdir_r... POSIX checking for in_addr_t... yes General settings checking whether to include gcov symbols... no checking whether to include debugging symbols... no checking layout of installed files... PHP checking path to configuration file... /root/ispconfig/php checking where to scan for configuration files... DEFAULT checking whether to enable safe mode by default... no checking for safe mode exec dir... /usr/local/php/bin checking whether to enable PHP's own SIGCHLD handler... no checking whether to enable magic quotes by default... no checking whether to enable runpaths... yes checking whether to explicitly link against libgcc... no checking whether to enable short tags by default... yes checking whether to enable dmalloc... no checking whether to enable IPv6 support... yes checking how big to make fd sets... using system default checking whether to enable versioning... no Configuring extensions checking whether to enable LIBXML support... no checking libxml2 install dir... no checking for OpenSSL support... yes checking for Kerberos support... no checking for pkg-config... /usr/bin/pkg-config checking for OpenSSL version... >= 0.9.6 checking for CRYPTO_free in -lcrypto... yes checking for SSL_CTX_set_ssl_version in -lssl... yes checking for PCRE support... yes checking for ZLIB support... no checking if the location of ZLIB install directory is defined... no checking whether to enable bc style precision math functions... no checking for BZip2 support... no checking whether to enable calendar conversion support... no checking whether to enable ctype functions... yes checking for CURL support... no checking if we should use CURL for url streams... no checking size of long... (cached) 4 checking size of int... (cached) 4 checking for int32_t... yes checking for uint32_t... yes checking for sys/types.h... (cached) yes checking for inttypes.h... (cached) yes checking for stdint.h... (cached) yes checking for string.h... (cached) yes checking for stdlib.h... (cached) yes checking for strtoll... yes checking for atoll... yes checking for strftime... (cached) yes checking whether to enable DBA... no checking for QDBM support... no checking for GDBM support... no checking for NDBM support... no checking for Berkeley DB4 support... no checking for Berkeley DB3 support... no checking for Berkeley DB2 support... no checking for DB1 support... no checking for DBM support... no checking for CDB support... no checking for INI File support... no checking for FlatFile support... no checking whether to enable DBA interface... no checking whether to enable dbase support... no checking whether to enable DOM support... no checking whether to enable EXIF (metadata from images) support... no checking for FrontBase SQL92 (fbsql) support... no checking for FDF support... no checking whether to enable the bundled filePro support... no checking whether to enable FTP support... yes checking OpenSSL dir for FTP... no checking for OpenSSL version... >= 0.9.6 checking for CRYPTO_free in -lcrypto... (cached) yes checking for SSL_CTX_set_ssl_version in -lssl... (cached) yes checking for GD support... no checking for the location of libjpeg... no checking for the location of libpng... no checking for the location of libXpm... no checking for FreeType 1.x support... no checking for FreeType 2... no checking for T1lib support... no checking whether to enable truetype string function in GD... no checking whether to enable JIS-mapped Japanese font support in GD... no checking for GNU gettext support... no checking for GNU MP support... no checking whether to enable hash support... yes checking size of short... 2 checking size of int... (cached) 4 checking size of long... (cached) 4 checking size of long long... (cached) 8 checking for hwapi support... no checking for iconv support... yes checking for iconv... yes checking if iconv is glibc's... yes checking if iconv supports errno... yes checking if your cpp allows macro usage in include lines... yes checking for IMAP support... no checking for IMAP Kerberos support... no checking for IMAP SSL support... no checking for Informix support... no checking for InterBase support... no checking for LDAP support... no checking for LDAP Cyrus SASL support... no checking whether to enable multibyte string support... yes checking whether to enable multibyte regex support... yes checking for external libmbfl... no checking for variable length prototypes and stdarg.h... yes checking for stdlib.h... (cached) yes checking for string.h... (cached) yes checking for strings.h... yes checking for unistd.h... (cached) yes checking for sys/time.h... (cached) yes checking for sys/times.h... yes checking size of int... (cached) 4 checking size of short... (cached) 2 checking size of long... (cached) 4 checking for working const... (cached) yes checking whether time.h and sys/time.h may both be included... yes checking for working alloca.h... (cached) yes checking for alloca... (cached) yes checking for 8-bit clean memcmp... yes checking for mcrypt support... no checking for mhash support... no checking whether to include mime_magic support... no checking for MING support... no checking for msession support... no checking for mSQL support... no checking for MSSQL support via FreeTDS... no checking for MySQL support... yes checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... no configure: error: Cannot find MySQL header files under /usr. Note that the MySQL client library is not bundled anymore! ERROR: Could not configure PHP cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory mv: cannot stat `binaries/zip': No such file or directory mv: cannot stat `binaries/unzip': No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `spamassassin': No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `uudeview': No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `clamav': No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors ./setup2: line 777: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
Please run Code: apt-get install mysql-server mysql-client libmysqlclient12-dev as described on http://www.howtoforge.com/perfect_setup_ubuntu_5.10_p4 and try again.
I already had mysql 4.1 installed and running, but tried what you suggested anyway... Now MySQL wont work
There is a whole thread on your error but.... I will help you out, if you install libmysql14_dev then it will solve your issues, i also installed flex, so i dont know if you need to do that, but i can almost tell you that with the server install on ubuntu, you need that lib. After that you should be able to compile.
