not shure, if this belongs to here, but my update from .9 to .10 is stuck. Because I'm installing the german version the line it hangs is: I saw messages like this in another post here before but without solution...however this is top-output: Code: top - 19:59:55 up 46 min, 2 users, load average: 1.94, 1.87, 1.53 Tasks: 82 total, 1 running, 81 sleeping, 0 stopped, 0 zombie Cpu(s): 2.3% us, 0.7% sy, 0.0% ni, 0.0% id, 97.0% wa, 0.0% hi, 0.0% si Mem: 255380k total, 253404k used, 1976k free, 956k buffers Swap: 2094112k total, 216k used, 2093896k free, 170796k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3201 root 17 0 1716 624 1372 S 2.3 0.2 1:02.03 gzip 3205 root 16 0 2064 1052 1852 R 0.3 0.4 0:00.08 top 1 root 16 0 1504 512 1352 S 0.0 0.2 0:00.83 init 2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 5 -10 0 0 0 S 0.0 0.0 0:02.99 events/0 5 root 8 -10 0 0 0 S 0.0 0.0 0:00.00 khelper 6 root 14 -10 0 0 0 S 0.0 0.0 0:00.00 kacpid 35 root 5 -10 0 0 0 S 0.0 0.0 0:00.07 kblockd/0 45 root 15 0 0 0 0 S 0.0 0.0 0:00.78 pdflush 46 root 15 0 0 0 0 S 0.0 0.0 0:00.02 pdflush 48 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 aio/0 47 root 15 0 0 0 0 S 0.0 0.0 0:00.78 kswapd0 184 root 25 0 0 0 0 S 0.0 0.0 0:00.00 kseriod 313 root 15 0 0 0 0 D 0.0 0.0 0:00.95 kjournald 808 root 15 0 0 0 0 S 0.0 0.0 0:00.00 khubd 1954 root 16 0 2260 780 2092 S 0.0 0.3 0:00.05 syslogd and this ps aux: Code: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.2 1504 512 ? S 19:13 0:00 init [2] root 2 0.0 0.0 0 0 ? S 19:13 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 19:13 0:00 [ksoftirqd/0] root 4 0.1 0.0 0 0 ? S< 19:13 0:02 [events/0] root 5 0.0 0.0 0 0 ? S< 19:13 0:00 [khelper] root 6 0.0 0.0 0 0 ? S< 19:13 0:00 [kacpid] root 35 0.0 0.0 0 0 ? S< 19:13 0:00 [kblockd/0] root 45 0.0 0.0 0 0 ? S 19:13 0:00 [pdflush] root 46 0.0 0.0 0 0 ? S 19:13 0:00 [pdflush] root 48 0.0 0.0 0 0 ? S< 19:13 0:00 [aio/0] root 47 0.0 0.0 0 0 ? S 19:13 0:00 [kswapd0] root 184 0.0 0.0 0 0 ? S 19:13 0:00 [kseriod] root 313 0.0 0.0 0 0 ? D 19:14 0:00 [kjournald] root 808 0.0 0.0 0 0 ? S 19:14 0:00 [khubd] root 1954 0.0 0.3 2260 780 ? Ss 19:15 0:00 /sbin/syslogd -a root 1957 0.0 0.5 2384 1492 ? Ss 19:15 0:00 /sbin/klogd postgrey 1972 0.0 3.0 10608 7728 ? Ss 19:15 0:00 /usr/sbin/postgre root 1977 0.0 0.1 1672 476 ? S 19:15 0:00 /usr/sbin/courier root 1978 0.0 0.1 1808 508 ? S 19:15 0:00 /usr/lib/courier/ root 1980 0.0 0.1 1808 508 ? S 19:15 0:00 /usr/lib/courier/ root 1981 0.0 0.1 1808 508 ? S 19:15 0:00 /usr/lib/courier/ root 1982 0.0 0.1 1808 508 ? S 19:15 0:00 /usr/lib/courier/ root 1983 0.0 0.1 1808 508 ? S 19:15 0:00 /usr/lib/courier/ root 1984 0.0 0.1 1808 508 ? S 19:15 0:00 /usr/lib/courier/ root 1989 0.0 0.2 2476 728 ? S 19:15 0:00 /usr/sbin/courier root 1991 0.0 0.1 1544 304 ? S 19:15 0:00 /usr/sbin/courier root 2002 0.0 0.2 2476 728 ? S 19:15 0:00 /usr/sbin/courier root 2004 0.0 0.1 1544 304 ? S 19:15 0:00 /usr/sbin/courier root 2010 0.0 0.2 2476 728 ? S 19:15 0:00 /usr/sbin/courier root 2013 0.0 0.1 1540 300 ? S 19:15 0:00 /usr/sbin/courier root 2023 0.0 0.2 2476 728 ? S 19:15 0:00 /usr/sbin/courier root 2025 0.0 0.1 1540 300 ? S 19:15 0:00 /usr/sbin/courier root 2029 0.0 2.1 7552 5372 ? D 19:15 0:02 python /usr/bin/d root 2034 0.0 0.1 1496 444 ? Ss 19:15 0:00 /usr/sbin/inetd root 2243 0.0 0.6 6556 1580 ? Ss 19:15 0:00 /usr/sbin/saslaut root 2244 0.0 0.6 6556 1580 ? S 19:15 0:00 /usr/sbin/saslaut root 2245 0.0 0.6 6556 1580 ? S 19:15 0:00 /usr/sbin/saslaut root 2246 0.0 0.6 6556 1580 ? S 19:15 0:00 /usr/sbin/saslaut root 2247 0.0 0.6 6556 1580 ? S 19:15 0:00 /usr/sbin/saslaut root 2253 0.0 0.5 3468 1504 ? Ss 19:15 0:00 /usr/sbin/sshd root 2258 0.0 0.2 1912 656 ? Ss 19:15 0:00 /usr/bin/rsync -- daemon 2271 0.0 0.2 1684 628 ? Ss 19:15 0:00 /usr/sbin/atd root 2274 0.0 0.3 1764 816 ? Ss 19:15 0:00 /usr/sbin/cron root 2342 0.0 3.8 22980 9732 ? Ss 19:16 0:01 /usr/sbin/apache2 root 2343 0.0 0.1 1616 432 ? S 19:16 0:00 /root/ispconfig/c www-data 2443 0.1 5.2 26068 13384 ? S 19:16 0:03 /usr/sbin/apache2 root 2451 0.0 0.5 3668 1332 ? Ss 19:16 0:00 /usr/lib/postfix/ postfix 2457 0.0 0.4 2976 1096 ? S 19:16 0:00 pickup -l -t fifo postfix 2458 0.0 0.4 3008 1124 ? S 19:16 0:00 qmgr -l -t fifo - bind 2470 0.0 1.0 29436 2652 ? Ss 19:16 0:00 /usr/sbin/named - nobody 2483 0.0 0.9 4772 2300 ? Ss 19:16 0:00 proftpd: (accepti root 2504 0.0 0.1 1500 484 tty1 Ss+ 19:16 0:00 /sbin/getty 38400 root 2510 0.0 0.1 1500 484 tty2 Ss+ 19:16 0:00 /sbin/getty 38400 root 2511 0.0 0.1 1500 484 tty3 Ss+ 19:16 0:00 /sbin/getty 38400 root 2512 0.0 0.1 1500 484 tty4 Ss+ 19:16 0:00 /sbin/getty 38400 root 2513 0.0 0.1 1500 484 tty5 Ss+ 19:16 0:00 /sbin/getty 38400 root 2514 0.0 0.1 1500 484 tty6 Ss+ 19:16 0:00 /sbin/getty 38400 www-data 2579 0.1 5.2 25992 13308 ? S 19:16 0:02 /usr/sbin/apache2 www-data 2588 0.0 5.1 25884 13184 ? S 19:16 0:01 /usr/sbin/apache2 www-data 2607 0.0 5.1 25952 13264 ? S 19:18 0:02 /usr/sbin/apache2 root 2610 0.0 0.9 14604 2348 ? Ss 19:18 0:00 sshd: [EMAIL="root@notty"]root@notty[/EMAIL] root 2613 0.0 0.4 3188 1076 ? Ss 19:18 0:00 /usr/lib/sftp-ser www-data 2862 0.2 5.2 26064 13372 ? S 19:21 0:06 /usr/sbin/apache2 www-data 2864 0.1 5.2 25996 13300 ? S 19:21 0:04 /usr/sbin/apache2 www-data 2873 0.1 5.1 25892 13200 ? S 19:23 0:02 /usr/sbin/apache2 www-data 2892 0.1 5.2 26056 13364 ? S 19:30 0:02 /usr/sbin/apache2 www-data 2893 0.0 3.8 23200 9944 ? S 19:31 0:00 /usr/sbin/apache2 www-data 2894 0.0 5.1 25876 13164 ? S 19:31 0:00 /usr/sbin/apache2 root 2952 0.0 0.9 14452 2304 ? Ss 19:41 0:00 sshd: [EMAIL="root@pts/0"]root@pts/0[/EMAIL] root 2955 0.0 0.6 3060 1644 pts/0 Ss 19:41 0:00 -bash root 2980 0.0 0.4 2736 1232 pts/0 S+ 19:48 0:00 /bin/sh ./setup root 2982 0.0 0.5 2768 1312 pts/0 S+ 19:48 0:00 /bin/bash ./setup root 3002 0.0 0.5 2844 1408 pts/0 S+ 19:48 0:00 /bin/bash ./setup root 3091 0.0 0.5 2772 1320 pts/0 S+ 19:48 0:00 /bin/sh /usr/bin/ root 3127 0.0 0.5 2772 1324 pts/0 S+ 19:48 0:00 /bin/sh /usr/bin/ mysql 3128 0.0 5.7 116676 14732 pts/0 S+ 19:48 0:00 /usr/sbin/mysqld root 3129 0.0 0.2 1808 548 pts/0 S+ 19:48 0:00 logger -p daemon. root 3191 0.0 0.9 14452 2304 ? Ss 19:48 0:00 sshd: [EMAIL="root@pts/1"]root@pts/1[/EMAIL] root 3194 0.0 0.6 3060 1644 pts/1 Ss 19:49 0:00 -bash root 3200 0.4 0.4 2408 1056 pts/0 S+ 19:50 0:02 tar -pczf home_ad root 3201 10.7 0.2 1716 624 pts/0 D+ 19:50 1:06 gzip root 3212 0.0 0.3 2496 844 pts/1 R+ 20:00 0:00 ps aux in this stadium...is it safe just to reboot the server and wait for a possible solution or should the server stay like this? I did a reboot once already and it didn't seem to harm the system, but I'm not shure, what's going wrong....
Just press [ctrl] + c to get the prompt back. Rebooting is not nescessary. Then execute the command: df -h and post the output.
well, output is (afer i already did the reboot ): Code: Dateisystem Größe Benut Verf Ben% Eingehängt auf /dev/hda1 7,5G 2,0G 5,1G 29% / tmpfs 125M 0 125M 0% /dev/shm
...maybe there went something wrong or changed differently then expected with my last apt-get upgrade?
about 15 min....the last Updates started right away, that's why I'm so confused...my second server, the one at home did the update perfectly in time....hmhm. However, if I would start a 4th try....would there be anything from the last update-starts I would have to delete or so? maybe some temp-files? And how long should I wait for the update before stopping?
...maybe, maybe not, but I finally got it started! I took another look in "top" right after reboot, because phpSysInfo told me that memory is used by 97%...although the kernel does this after a while, I was thinking that this is the point with only 256MB at all??? However, I stopped postgrey, because this was beside mysqld the main memory-user and restartet ./setup again...after 2min. waiting on the same "...wird vorbereitet"-screen it went on. My System has 2 domains running with a compaq 700MHZ PIII, 10GB, 256MB...is there anything I could increase performance or is this system fine like it is? Actually, gzip takes at the beginning of the setup (changing a couple times in "top") nearly 90% cpu.... ....a small question on the end: is it a security risk to leave the files include_path in php.ini for phpSysInfo on "." or should I comment that out again?
ISPConfig needs to unpack about 30 MB of files, this may increase the load for a short time during installation. But thas normally not a problem. The include path should contain ".", otherwise relative includes wont work anymore.
So, because it wasn't like this in original php.ini (/etc/php4/apache2/php.ini), it would be correct to do it this way: Code: [SIZE=1] ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/usr/share/php" [COLOR=red]include_path = "."[/COLOR] ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes" [/SIZE] ?? With the serverload I have to figure out what's slowing him down...are there some programs that would be usefull to check what's maybe going on with memory or maybe even with network-traffic (maybe there are to many bots or what else...)
Same problem here. Need help. I will not panic and will wait for your solution: ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here! root@jfo:/# apt-cache search libmysqlclient libmysqlclient10 - LGPL-licensed client library for MySQL databases libmysqlclient10-dev - LGPL-licensed client development files for MySQL databases libmysqlclient12 - mysql database client library libmysqlclient12-dev - mysql database development files libmysqlclient14 - mysql database client library libmysqlclient14-dev - mysql database development files libmysqlclient15-dev - mysql database development files libmysqlclient15off - mysql database client library PS: Upgrade from 8 to 9 went smoothly... nothing was touched in mysql and now this happened.
PHP Version 5.1.2 System Linux jfo.nortenet.pt 2.6.15-23-server #1 SMP Tue May 23 15:10:35 UTC 2006 i686 Build Date Jul 18 2006 23:55:22 Server API Apache 2.0 Handler Virtual Directory Support disabled Configuration File (php.ini) Path /etc/php5/apache2/php.ini PHP API 20041225 PHP Extension 20050922 Zend Extension 220051025 Debug Build no Thread Safety disabled Zend Memory Manager enabled IPv6 Support enabled Registered PHP Streams php, file, http, ftp, compress.bzip2, compress.zlib, https, ftps Registered Stream Socket Transports tcp, udp, unix, udg, ssl, sslv3, sslv2, tls Registered Stream Filters string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, convert.iconv.*, bzip2.*, zlib.*
I need to know the mysql version, not the PHP version. Please exceute the following command and post the output: mysqld -V
I am very sorry about this nonsense. To many things at the same time: mysqld Ver 5.0.22-Debian_0ubuntu6.06-log for pc-linux-gnu on i486 (Debian Etch distribution) Thanks
Plese execute: apt-get install libmysqlclient15-dev and then: mkdir /root/ispconfig and then unpack and run the ISPConfig setup script again.
...ähm...just a short hint, if I edited the right php.ini and the right part of it for the mentioned include_path??
If you want to know which php.ini is used by your PHP, make a script which includes the function phpini();, which shows the path to the php.ini.
Still no progress... please give me a hint. Thanks RC4_CHUNK is undefined make: Warning: File `Makefile.org' has modification time 1.4e+08 s in the future Makefile is older than Makefile.org, Configure or config. Reconfigure the source tree (via './config' or 'perl Configure'), please. make: *** [Makefile] Error 1 make: Warning: File `Makefile.org' has modification time 1.4e+08 s in the future Makefile is older than Makefile.org, Configure or config. Reconfigure the source tree (via './config' or 'perl Configure'), please. make: *** [Makefile] Error 1 ERROR: Could not make OpenSSL cd: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory mv: cannot stat `binaries/aps.tar.gz': No such file or directory mv: cannot stat `binaries/spamassassin.tar.gz': No such file or directory mv: cannot stat `binaries/uudeview.tar.gz': No such file or directory mv: cannot stat `binaries/clamav.tar.gz': No such file or directory mv: cannot stat `binaries/cronolog': No such file or directory mv: cannot stat `binaries/cronosplit': No such file or directory mv: cannot stat `binaries/ispconfig_tcpserver': No such file or directory mv: cannot stat `binaries/zip': No such file or directory mv: cannot stat `binaries/unzip': No such file or directory tar: spamassassin.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `spamassassin': No such file or directory tar: uudeview.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `uudeview': No such file or directory tar: clamav.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors mv: cannot stat `clamav': No such file or directory tar: aps.tar.gz: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors ./setup2: line 860: ispconfig_tmp/php/bin/php: No such file or directory ERROR: The PHP binary coming with ISPConfig does not work properly on your system! The installation routine stops here!
This time the compilation failed because your system time is wrong. Plaese execute: ntpdate pool.ntp.org to correct your system time or set it manually to the correct time and date. Then execute: mkdir /root/ispconfig and run the setup again.
Thanks, this time the update went well and smoth as 2.8 -> 2.9. However I cannot access https://212.13.41.2:81 so I dont have the control panel. Any Ideas? Network Access Message: The page cannot be displayed Technical Information (for Support personnel) Error Code: 502 Proxy Error. Connection refused(10061) IP Address: 212.13.41.2 Date: 24-02-2007 13:59:27 [GMT] Server: afonso.JFO.local Source: proxy
