Code: ################################### # # ISPConfig vHost Configuration File # Version 1.0 # ################################### # NameVirtualHost 75.27.81.221:80 <VirtualHost 75.27.81.221:80> ServerName localhost ServerAdmin root@localhost DocumentRoot /var/www/sharedip </VirtualHost> # # ###################################### # Vhost: db.er-center.com:80 ###################################### # # <VirtualHost 75.27.81.221:80> ServerName db.er-center.com:80 ServerAdmin [email protected] DocumentRoot /var/www/web11/web ServerAlias er-center.com DirectoryIndex index.html index.htm index.php index.php5 index.php4 index.php3 index.shtml index.cgi index.pl index.jsp Default.htm default.htm ScriptAlias /cgi-bin/ /var/www/web11/cgi-bin/ AddHandler cgi-script .cgi AddHandler cgi-script .pl ErrorLog /var/www/web11/log/error.log AddType application/x-httpd-php .php .php3 .php4 .php5 <Files *.php> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php3> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php4> SetOutputFilter PHP SetInputFilter PHP </Files> <Files *.php5> SetOutputFilter PHP SetInputFilter PHP </Files> php_admin_flag safe_mode Off AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/web11/web/error/" ErrorDocument 400 /error/invalidSyntax.html ErrorDocument 401 /error/authorizationRequired.html ErrorDocument 403 /error/forbidden.html ErrorDocument 404 /error/fileNotFound.html ErrorDocument 405 /error/methodNotAllowed.html ErrorDocument 500 /error/internalServerError.html ErrorDocument 503 /error/overloaded.html AliasMatch ^/~([^/]+)(/(.*))? /var/www/web11/user/$1/web/$3 AliasMatch ^/users/([^/]+)(/(.*))? /var/www/web11/user/$1/web/$3 </VirtualHost> # # # Just wondering...Are you able to reset the web[ID] counter? Like right now it's 11 can i set it back to one in a simple manner?
You're using the wrong IP address (75.27.81.221 instead of 192.168.1.71 or 192.168.1.79). You must use the IP addresses in ISPConfig that you see when you run Code: ifconfig on the shell. No, that's not possible.
Ooops...I didn't notice I posted that wrong. My router rebooted and it is the one that assigns IPs, so when I posted that, I still hadn't set up static IPs on the router, but now eth0 shows Code: inet addr:75.27.81.221 Bcast:75.27.81.255 Mask:255.255.255.0
Code: ifconfig eth0 Link encap:Ethernet HWaddr 00:17:31:C4:4F:33 inet addr:75.27.81.221 Bcast:75.27.81.255 Mask:255.255.255.0 inet6 addr: fe80::217:31ff:fec4:4f33/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:450247 errors:0 dropped:0 overruns:0 frame:0 TX packets:13050 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:29914241 (28.5 MiB) TX bytes:558597 (545.5 KiB) Interrupt:10 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:17:31:C4:56:74 inet addr:192.168.1.79 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::217:31ff:fec4:5674/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:513645 errors:0 dropped:0 overruns:0 frame:0 TX packets:84062 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:51409506 (49.0 MiB) TX bytes:10897968 (10.3 MiB) Interrupt:11 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2827 errors:0 dropped:0 overruns:0 frame:0 TX packets:2827 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2477806 (2.3 MiB) TX bytes:2477806 (2.3 MiB)
Auto create ifconfig / eth* record? I'm not sure I'm posting this in the correct thread, and please pardon me for interjecting a question into your conversation, but I believe its the most relevant and up to date thread ... We're moving over from Plesk, and we're obviously new to ISPconfig in general. We've got a fair handle on the system and have installed things successfully. Now comes the headaches ... We're trying to simply (well maybe not simply) auto detect a block of assigned IP's issued by Godaddy and automatically create interface records / eth* for each. We've got a fair grip on the programming aspect, but are completely baffled where the allocated static IP's are being "parked" on the server. In Plesk, there is a "Re-Read" IP pool option that will scan and pick up any IPs allocated to your server. This is the same process where looking for with ISPconfig, and if none exists, we will create one. I've been search for 2 days for some direction, had numerous frustrating calls with NoDaddy's brainless Teir 1 support (Teir 2 no longer takes phone calls - grrrr), and read countless online articles looking for some hint, but I'm lost. A point in the right direction would be tremendously helpful. Question simplified: How do we have ISPconfig (or relevant utility) scan for allocated IPs and create necessary records for each one detected? We're trying to do a tiny bit more then that, but I need to start somewhere. Thanks in advance for your time, Respectfully, Chris
If $go_info["server"]["network_config"] is set to 0 in /home/admispconfig/ispconfig/lib/config.inc.php: Set up the new IP addresses manually on your system, and afterwards add the new IP addresses to the IP address field under Management -> Server -> Settings. If $go_info["server"]["network_config"] is set to 1: Just add your new IP addresses to the IP address field under Management -> Server -> Settings, and ISPConfig will add the new IP addresses to your network configuration.
Auto Bind IP tool? I may have mis-stated my initial question ... In respect to your response, it seems both steps 1 and 2 are one in the same: 1) "Set up the new IP addresses manually on your system, and afterwards add the new IP addresses to the IP address field ... " 2) "Just add your new IP addresses to the IP address field ..." <><> What I am actually looking for is a way to automatically BIND the IPs to the Ethernet device as Godaddy issues us blocks. The only way to make use of the IPs is to first create the necessary interface / eth* records ... obviously. In order to create these interfaces, the server must first know the IPs. The "re-read" IPs option inside the server management IP pool tool of Plesk will read some file on the server and Bind these IPs to the Ethernet Device. When using the "re-read" tool, newly provisioned IPs become available for use on the server ... If Godaddy provisions IPs, but this Re-read tool is NOT used, then the IPs will never become available for use inside plesk. What file is this Re-read tool grabbing these provisioned IPs from? ... Is godaddy creating the interfaces for the IPs on the server? .. I doubt it ... so the question remains, what is Plesk using/reading to grab these IPs? With that said, this is the functionality im looking for with ISPconfig. Adding IPs to the IP pool is fine, but in our case, we are building an automatic account creation and SSL system which will assign a static IP from our pool to the SSL / Hosting clients at signup. Our system will auto request(email) a new block of IPs from godaddy when a minimum limit is reached. Godaddy takes roughly a day to assign new IPs, but when they do, there is an added step (if not using Plesk) of entering the IPs into the server IP pool. Our system will be totally automated and hands off for the most part, but if we cannot auto Bind IPs then our attempts for no human intervention is in vain. I appreciate your help tremendously, Thanks again in advance Respectfully, Chris
Maybe you misread falkos post as ISPConfig offers automatic network configuration. 1) Enable automatic network configuration in ISPConfig as falko suggested. 2) Instead of adding the IP addresses manually to the IP addresses field (which can be done in a chunk as the IP addresses are all in the sma field, one per line) you can update the field directly in the database, it is in the isp_isp_server and isp_server_ip table, set the status field in the isp_isp_server table to 'u' and then set the .run file to start the network configuration.
