Need little help

I'm totally new to Linux, so please take it easy on me

I have a linux box (FC6) behind the router, with the local IP address 192.168.0.10 that is NAT-ed through the router to the Internet and is presented as 212.212.212.212 (example). I also have a domain domain.net registered on the Internet Register. Now let's go to the questions

1. In the ISPConfig setup, one of the very last questions was IP address, and I've typed in my global IP address (212.212.212.212), is this correct?

The host is called test and the domain is domain.net, so ISPConfig is accessible via https://test.domain.net:81 I've created new client AABBCC with their internet domain www.aabbcc.com (example)

2. Now, if I look under DNS under the client AABBCC, I can see that Nameserver 1 and Nameserver 2 are test.domain.net is this correct?

3. On the Records tab I HAVE The following:

For the A records

Code:

  IP-Adresse  	             Hostname 
  212.212.212.212  	  www 

and for the MX records

Code:

  Mailserver  	             Hostname 
  test.domain.net  	  www 

is this correct?

4. The domain www.aabbcc.com is registered on the Internet Register. What should I use as my namserver address. ns1.domain.net and ns2.domain.net (have made these in advance) or test.domain.net (that is the address of the box with ISPConfig)?

 

Thank you very much, I got that right. Now, however I have another problem. I've made another website 123.net and I can see that ISPConfig has created vhost, but if I try to opet the aforementioned domain in the browser all I got is default apache webpage from the default vhost. Then I have to edit vhost via webmin, and change Server to ANY and restart apache in order to work. Beside if I want to use SSL I've got an error while restarting apache that SSL port is overlaping and that default one has a priority. Any idea what am I missing out? Thanks

 

well when creating new site, I've got an option to chose either the local IP address 192.168.0.10 or the global one 212.212.212.212, and I've select the global one! I hope this is what I should select!?

 

What's the output of

Code:

ifconfig

? You must select the IP address that you see in the output.

 

Code:

[root@hera ~]# ifconfig
eth0    Link encap:Ethernet  HWaddr 00:0C:F1:8A:8E:57
          inet addr:192.168.0.10  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:f1ff:fe8a:8e57/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:8395 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2485 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3182293 (3.0 MiB)  TX bytes:214706 (209.6 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:4433 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4433 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4848873 (4.6 MiB)  TX bytes:4848873 (4.6 MiB)

peth0   Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:8487 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2622 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3201366 (3.0 MiB)  TX bytes:229347 (223.9 KiB)

vif0.0   Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:2487 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8395 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:215030 (209.9 KiB)  TX bytes:3182293 (3.0 MiB)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:5229 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:382868 (373.8 KiB)  TX bytes:0 (0.0 b)

[root@hera ~]#

ifconfig shows in eth0 IP 192.168.0.10, but if I use that IP will that IP be used when DNS records are created? Just to mention again, during the ISPConfig, when I was asked for the IP, I've entered the global IP 212.212.212.212 and not local 192.168.0.10.

Take a look at the image

 

I'll give it a try thanks