Hi all, hope you can help me, i desisted to use CentOS because i couldn't get it to receive emails. So and as i new to this and most of examples are for Debian i change the OS to Debian 9. I used the "The Perfect Server - Debian 9 (Stretch) with Apache, BIND, Dovecot, PureFTPD and ISPConfig 3.1" to install everything in my server. ISPConfig Version: 3.1.14p1 now i have a different problem i can't send email, and when i try to load the "http://70.35.205.116/roundcubemail/installer" as i had it in CentOS it doent run, checking the instalation on Page3 , i can see that is a little bit more simple for debian but i doesn't include the web installer of the Roundcube. So i try to added following this example: https://www.rosehosting.com/blog/how-to-install-roundcube-webmail-on-debian-9/ but i still not opening could someone help me?.
I don't think there is web installer for debian based on perfect server tutorials unless you obtained and trying to install roundcube manually.
Hi ahrasis i know and that's why i try to added following the tutorial example i paste before, but i wasn't been able to get it working. If anyone can point me in the right direction i will appreciate a lot.
If you followed the Perfect server guide, you should have a working Roundcube. https://www.howtoforge.com/tutorial...ovecot-ispconfig-3-1/3/#-installnbsproundcube So no need for a network installer or some such.
Hi Taleman, thanks for the response. Let me tell you that following the perfect server guide it never ask me for the "Password of the databases administrative user", don't know why!, but as I was able to create email users and login into roundcube, I did not think it was important, but that might be the problem as that i cannot send or receive emails, in Roundcube i've got a timeout connection error. That's why I want the roundcube webmail installer, to check if everything is ok and also because i could add some features to roundcube. But as the issue that i have what do you suggest?, start from scratch?.
First of all, follow exactly and only the perfect server tutorial and don't mix it up with other tutorials unless you really know what you are doing. Secondly, set the vhost correctly for roundcube so that you can access it via its page. Based on your above reply it seems that you have past this. Thirdly, your port 25 must always be opened and accessible otherwise your mail server will normally fail. Check your logs will be wise to determine the failure. Again there is no web installer unless you want to install or update roundcube manually.
Aharasis let me respond point by point: 1- I followed the perfect server tutorial step by step, and didn't mix it up with other tutorials. After see I wasn't able to send and receive email, it was when i decide to check it with the Roundcube webmail installer. 2- If you speak about the Step 4 of the tutorial i change it to look like this http://roundcube.domain.net/installer but is not working, (domain.net is no the real one). 3- This might be the more important thing; Here in Mexico that port is blocked for the biggest ISP provider, also the company in which i have hosted my server (ionos.mx), has that port blocked. Thats why i set to be used the port 465. About the logs in ISPConfig don't get any errors, and as i'm a complete noob i must ask for a little bit of indulgence and patience, but if you want i can copy the outcome of the logs.
It had already discussed many times regarding the need for port 25 for a mail server, so to answer you about it please read: https://www.howtoforge.com/communit...il-ispconfig3-1-port-25-blocked-by-isp.75257/ You can search this forum or google around for more info.
Ok i've spoke to my hosting and they letme use the 25 port so the email are arraibing witout a problem, but for sending emails is not working, the roundcube stay thinking and after a time, i've got a timeout connection error. The funny thing is that when i was using CentOS y was able to change the sending port to 465 and the email reach the destination without problemas, of course in centos i had the Roundcube Webmail Installer, so y was able to change everithing i need. i'll leave you the logs if you want to check it. Mail-Log Code: Jul 23 18:22:04 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3754, secured, session=<dXLodWGOfNIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:04 server1 dovecot: imap([email protected]): Logged out in=70 out=633 Jul 23 18:22:05 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3757, secured, session=<d5XvdWGOftIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:05 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3758, secured, session=<86LvdWGOgNIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:05 server1 dovecot: imap([email protected]): Logged out in=316 out=1536 Jul 23 18:22:05 server1 dovecot: imap([email protected]): Logged out in=194 out=938 Jul 23 18:22:43 server1 postfix/smtpd[3767]: connect from mail-io1-f48.google.com[209.85.166.48] Jul 23 18:22:43 server1 postfix/smtpd[3767]: NOQUEUE: filter: RCPT from mail-io1-f48.google.com[209.85.166.48]: <[email protected]>: Sender address triggers FILTER amavis:[127.0.0.1]:10026; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<mail-io1-f48.google.com> Jul 23 18:22:43 server1 postfix/smtpd[3767]: NOQUEUE: filter: RCPT from mail-io1-f48.google.com[209.85.166.48]: <[email protected]>: Sender address triggers FILTER amavis:[127.0.0.1]:10024; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<mail-io1-f48.google.com> Jul 23 18:22:43 server1 postfix/smtpd[3767]: 85A14614DA: client=mail-io1-f48.google.com[209.85.166.48] Jul 23 18:22:43 server1 postfix/cleanup[3776]: 85A14614DA: message-id=<CACdCFcQfQ_kj4cpA-cmRjzcvZcuQMPyT+Ph55kH1kRLYc0Qeug@mail.gmail.com> Jul 23 18:22:43 server1 postfix/qmgr[1433]: 85A14614DA: from=<[email protected]>, size=2886, nrcpt=1 (queue active) Jul 23 18:22:43 server1 postfix/smtpd[3767]: disconnect from mail-io1-f48.google.com[209.85.166.48] ehlo=2 starttls=1 mail=1 rcpt=1 data=1 quit=1 commands=7 Jul 23 18:22:51 server1 postfix/smtpd[3791]: connect from localhost.localdomain[127.0.0.1] Jul 23 18:22:51 server1 postfix/smtpd[3791]: 5EDC8614DE: client=localhost.localdomain[127.0.0.1] Jul 23 18:22:51 server1 postfix/cleanup[3776]: 5EDC8614DE: message-id=<CACdCFcQfQ_kj4cpA-cmRjzcvZcuQMPyT+Ph55kH1kRLYc0Qeug@mail.gmail.com> Jul 23 18:22:51 server1 postfix/qmgr[1433]: 5EDC8614DE: from=<[email protected]>, size=3489, nrcpt=1 (queue active) Jul 23 18:22:51 server1 amavis[1300]: (01300-01) Passed CLEAN {RelayedInbound}, [209.85.166.48]:44524 [209.85.166.48] <[email protected]> -> <[email protected]>, Queue-ID: 85A14614DA, Message-ID: <CACdCFcQfQ_kj4cpA-cmRjzcvZcuQMPyT+Ph55kH1kRLYc0Qeug@mail.gmail.com>, mail_id: Ua-s1ypGtctN, Hits: -0.189, size: 2886, queued_as: 5EDC8614DE, dkim_sd=20161025:gmail.com, 7695 ms Jul 23 18:22:51 server1 postfix/smtp[3777]: 85A14614DA: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=8, delays=0.26/0.02/0/7.7, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 5EDC8614DE) Jul 23 18:22:51 server1 postfix/qmgr[1433]: 85A14614DA: removed Jul 23 18:22:51 server1 dovecot: lda([email protected]): sieve: msgid=<CACdCFcQfQ_kj4cpA-cmRjzcvZcuQMPyT+Ph55kH1kRLYc0Qeug@mail.gmail.com>: stored mail into mailbox 'INBOX' Jul 23 18:22:51 server1 postfix/pipe[3792]: 5EDC8614DE: to=<[email protected]>, relay=dovecot, delay=0.27, delays=0.02/0.01/0/0.23, dsn=2.0.0, status=sent (delivered via dovecot service) Jul 23 18:22:51 server1 postfix/qmgr[1433]: 5EDC8614DE: removed Jul 23 18:22:51 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3795, secured, session=<bxG4eGGOnNIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:51 server1 dovecot: imap([email protected]): Logged out in=318 out=2014 Jul 23 18:22:55 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3798, secured, session=<wRr2eGGOntIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:56 server1 dovecot: imap([email protected]): Logged out in=460 out=2300 Jul 23 18:22:56 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3800, secured, session=<FT39eGGOoNIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:56 server1 dovecot: imap([email protected]): Logged out in=54 out=784 Jul 23 18:22:56 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3802, secured, session=<IQ/+eGGOotIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:22:56 server1 dovecot: imap([email protected]): Logged out in=120 out=766 Jul 23 18:23:00 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3805, secured, session=<dO47eWGOpNIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:23:00 server1 dovecot: imap([email protected]): Logged out in=32 out=485 Jul 23 18:23:00 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=3807, secured, session=<3jI+eWGOptIAAAAAAAAAAAAAAAAAAAAB> Jul 23 18:23:00 server1 dovecot: imap([email protected]): Logged out in=419 out=2226 Jul 23 18:23:07 server1 postfix/smtps/smtpd[3827]: connect from localhost[::1] Jul 23 18:23:17 server1 postfix/smtps/smtpd[3551]: SSL_accept error from localhost[::1]: Connection timed out Jul 23 18:23:17 server1 postfix/smtps/smtpd[3551]: lost connection after CONNECT from localhost[::1] Jul 23 18:23:17 server1 postfix/smtps/smtpd[3551]: disconnect from localhost[::1] commands=0/0 Mail Warn-Log and Mail Error-Log are empty, also Mail Queue
Yes, here it is: Code: # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master" or # on-line: http://www.postfix.org/master.5.html). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (no) (never) (100) # ========================================================================== smtp inet n - y - - smtpd #465 inet n - y - - smtpd #smtp inet n - y - 1 postscreen #smtpd pass - - y - - smtpd #dnsblog unix - - y - 0 dnsblog #tlsproxy unix - - y - 0 tlsproxy submission inet n - - - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions -o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING smtps inet n - - - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions -o smtpd_recipient_restrictions=permit_mynetworks,permit_sasl_authenticated,reject # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING #628 inet n - y - - qmqpd pickup unix n - y 60 1 pickup cleanup unix n - y - 0 cleanup qmgr unix n - n 300 1 qmgr #qmgr unix n - n 300 1 oqmgr tlsmgr unix - - y 1000? 1 tlsmgr rewrite unix - - y - - trivial-rewrite bounce unix - - y - 0 bounce defer unix - - y - 0 bounce trace unix - - y - 0 bounce verify unix - - y - 1 verify flush unix n - y 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - y - - smtp relay unix - - y - - smtp # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - y - - showq error unix - - y - - error retry unix - - y - - error discard unix - - y - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - y - - lmtp anvil unix - - y - 1 anvil scache unix - - y - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d vmail ${extension} ${recipient} ${user} ${nexthop} ${sender} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o smtp_bind_address= 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes 127.0.0.1:10027 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restrictions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o receive_override_options=no_unknown_recipient_checks,no_header_body_checks -o smtp_send_xforward_command=yes -o milter_default_action=accept -o milter_macro_daemon_name=ORIGINATING -o disable_dns_lookups=yes
Main.cf here: Code: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on # fresh installs. compatibility_level = 2 # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = server1.hostbaires.net alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases myorigin = /etc/mailname mydestination = server1.hostbaires.net, localhost, localhost.localdomain relayhost = mynetworks = 127.0.0.0/8 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all html_directory = /usr/share/doc/postfix/html virtual_alias_domains = virtual_alias_maps = hash:/var/lib/mailman/data/virtual-mailman, proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2em$ virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /var/vmail virtual_uid_maps = mysql:/etc/postfix/mysql-virtual_uids.cf virtual_gid_maps = mysql:/etc/postfix/mysql-virtual_gids.cf sender_bcc_maps = proxy:mysql:/etc/postfix/mysql-virtual_outgoing_bcc.cf smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes smtpd_restriction_classes = greylisting greylisting = check_policy_service inet:127.0.0.1:10023 smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client zen.spamhaus.org, check_recipient_access mysq$ smtpd_tls_security_level = may transport_maps = hash:/var/lib/mailman/data/transport-mailman, proxy:mysql:/etc/postfix/mysql-virtual_transports.cf relay_domains = mysql:/etc/postfix/mysql-virtual_relaydomains.cf relay_recipient_maps = mysql:/etc/postfix/mysql-virtual_relayrecipientmaps.cf smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql-virtual_sender_login_maps.cf proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $sender_bcc_maps $virtual_mailbox_maps $virtual_mailbox_domains $rela$ smtpd_helo_required = yes smtpd_helo_restrictions = permit_sasl_authenticated, permit_mynetworks, check_helo_access regexp:/etc/postfix/helo_access, reject_invalid_hostname, reject_non_fqdn_hos$ smtpd_sender_restrictions = check_sender_access regexp:/etc/postfix/tag_as_originating.re , permit_mynetworks, permit_sasl_authenticated, check_sender_access mysql:/et$ smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-virtual_client.cf smtpd_client_message_rate_limit = 100 maildrop_destination_concurrency_limit = 1 maildrop_destination_recipient_limit = 1 virtual_transport = dovecot header_checks = regexp:/etc/postfix/header_checks mime_header_checks = regexp:/etc/postfix/mime_header_checks nested_header_checks = regexp:/etc/postfix/nested_header_checks body_checks = regexp:/etc/postfix/body_checks owner_request_special = no smtp_tls_security_level = may smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3 smtpd_tls_protocols = !SSLv2,!SSLv3 smtp_tls_protocols = !SSLv2,!SSLv3 smtpd_tls_exclude_ciphers = RC4, aNULL smtp_tls_exclude_ciphers = RC4, aNULL dovecot_destination_recipient_limit = 1 smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth content_filter = amavis:[127.0.0.1]:10024 receive_override_options = no_address_mappings message_size_limit = 0
This is what i've got in the email log from the moment i go into roundcube till i logout, same error as before: Code: Jul 24 18:00:02 server1 dovecot: imap-login: Disconnected (disconnected before auth was ready, waited 0 secs): user=<>, rip=::1, lip=::1, secured, session=<aD7qRHWO7OAAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:00:02 server1 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=::1, lip=::1, secured, session=<4k3qRHWOKOMAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:00:02 server1 postfix/smtpd[25710]: connect from localhost[::1] Jul 24 18:00:02 server1 postfix/smtpd[25710]: lost connection after CONNECT from localhost[::1] Jul 24 18:00:02 server1 postfix/smtpd[25710]: disconnect from localhost[::1] commands=0/0 Jul 24 18:02:11 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26067, secured, session=<Hy+hTHWO+OAAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:11 server1 dovecot: imap([email protected]): Logged out in=29 out=502 Jul 24 18:02:11 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26069, secured, session=<DiykTHWO+uAAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:11 server1 dovecot: imap([email protected]): Logged out in=70 out=633 Jul 24 18:02:12 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26071, secured, session=<tN2qTHWO/OAAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:12 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26073, secured, session=<IiCrTHWO/uAAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:12 server1 dovecot: imap([email protected]): Logged out in=318 out=1981 Jul 24 18:02:12 server1 dovecot: imap([email protected]): Logged out in=233 out=1026 Jul 24 18:02:16 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26075, secured, session=<VBbsTHWOAOEAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:16 server1 dovecot: imap([email protected]): Logged out in=74 out=545 Jul 24 18:02:17 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26077, secured, session=<QkUBTXWOAuEAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:17 server1 dovecot: imap([email protected]): Logged out in=319 out=1425 Jul 24 18:02:18 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26079, secured, session=<3AASTXWOBOEAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:18 server1 dovecot: imap([email protected]): Logged out in=32 out=485 Jul 24 18:02:19 server1 dovecot: imap-login: Login: user=<[email protected]>, method=PLAIN, rip=::1, lip=::1, mpid=26081, secured, session=</o0TTXWOBuEAAAAAAAAAAAAAAAAAAAAB> Jul 24 18:02:19 server1 dovecot: imap([email protected]): Logged out in=418 out=1845 Jul 24 18:02:21 server1 postfix/smtps/smtpd[26086]: connect from localhost[::1]
Searching for the logs in roundcube finally i found it and i got this: errors Code: [22-Jul-2019 16:45:12 -0500]: <68b49bfg> PHP Error: Request security check failed (GET /webmail/?_task=logout&_token=JsNnkY16NZ74Sqhv588pBsKI78YulU3o) [23-Jul-2019 02:33:29 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 02:33:29 -0500]: <8sfqrnu2> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 04:08:50 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 04:08:50 -0500]: <gvdc95ug> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 04:21:20 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 04:21:20 -0500]: <tg0ibgnk> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 14:17:44 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 14:17:44 -0500]: <banq8sp0> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 18:14:25 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 18:14:25 -0500]: <5gr42rdc> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 18:19:59 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 18:19:59 -0500]: <5gr42rdc> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 18:23:17 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 18:23:17 -0500]: <5gr42rdc> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 18:28:07 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 18:28:07 -0500]: <5gr42rdc> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [23-Jul-2019 20:34:33 America/Mexico_City] ERROR: Invalid response code received from server (-1) [23-Jul-2019 20:34:33 -0500]: <92rjqke2> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$ [24-Jul-2019 18:07:21 America/Mexico_City] ERROR: Invalid response code received from server (-1) [24-Jul-2019 18:07:21 -0500]: <8rbalvv8> SMTP Error: Connection failed: Invalid response code received from server in /usr/share/roundcube/program/lib/Roundcube/rcube.$
I finally got it working without uninstall it i'm putting the configs i did: config.inc.php inside /etc/roundcube Code: // SMTP server host (for sending mails). // To use SSL/TLS connection, enter hostname with prefix ssl:// or tls:// // If left blank, the PHP mail() function is used // Supported replacement variables: // %h - user's IMAP hostname // %n - hostname ($_SERVER['SERVER_NAME']) // %t - hostname without the first part // %d - domain (http hostname $_SERVER['HTTP_HOST'] without the first part) // %z - IMAP domain (IMAP hostname without the first part) // For example %n = mail.domain.tld, %t = domain.tld $config['smtp_server'] = ''; // SMTP port (default is 25; use 587 for STARTTLS or 465 for the // deprecated SSL over SMTP (aka SMTPS)) $config['smtp_port'] = 465; // SMTP username (if required) if you use %u as the username Roundcube // will use the current username for login $config['smtp_user'] = '%u'; // SMTP password (if required) if you use %p as the password Roundcube // will use the current user's password for login $config['smtp_pass'] = '%p';
